underbody is ready to finish with a clear lacquer

A very small update on the underbody progress. In very small steps, I was able to finish the underbody in the last days. Now it is waiting to get finished with a clear lacquer.

The upper side of the underbody.

The upper side of the underbody.

The lower side of the underbody panel.

The lower side of the underbody panel.

The lines of the water radiators are a bit to low. They collide a bit with the diffuser. But with a little pressure, the chassis fits quite well on the underbody.

The lines of the water radiators are a bit too low. They collide a bit with the diffuser. But with a little pressure, the chassis fits quite well on the underbody.

Advertisements

About paulsf1

My name is Paul Bischof. I’m a student in mechanical engineering at the Technical University of Graz in Austria, expected finishing in February 2016. Since I was eight years old, I am building model planes out of paperboard. Since 2004 I scratch (that means building without an assembling set) Formula 1 and sportscars in 1:10th scale. The average time I need for such a car is around 400 to 700 hours within 4 to 8 months. One car has around 3500 up to 5000 single components. On this blog, you can take a look on my work and later, after my studies, hopefully you can see me in Formula 1.

One response to “underbody is ready to finish with a clear lacquer”

  1. SuperSwede says :

    Really interesting to see this work in progress, thanks for sharing!

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: