starting rear suspension

Today, I started with the rear suspension. I decided, that it’s better, to complete both, front-and rear that I can fix all four brake assembleys at the same time. The wishbones at the rear are already finished.

The upright, drive shafts and pull-rods are missing.

 

As usual, I reinforced the suspension parts with a steel wire, which is also connected with the gearbox to improve rigidity of the links.

Advertisements

Tags:

About paulsf1

My name is Paul Bischof. I’m a student in mechanical engineering at the Technical University of Graz in Austria, expected finishing in February 2016. Since I was eight years old, I am building model planes out of paperboard. Since 2004 I scratch (that means building without an assembling set) Formula 1 and sportscars in 1:10th scale. The average time I need for such a car is around 400 to 700 hours within 4 to 8 months. One car has around 3500 up to 5000 single components. On this blog, you can take a look on my work and later, after my studies, hopefully you can see me in Formula 1.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: