RB7s underbody under progress

The rear part of the underbody is almost finished. Only at the starter slot, a few heat shieldings are missing. I left away the air ducts, which should feed the starter slot with air, because I made a mistake at the rear of the underbody. The 50mm step get tight to early at my car, so ther is no more space for this ducts – I didn’t know that, when i started with the underbody. At the heat shields I again tried to imitate the burning.

The RB7s underbody is almost finished.

A view of the almost finished rear part of the underbody.

Again a view of the rear part with it's special exhausts.

It's looking good!


About paulsf1

My name is Paul Bischof. I’m a student in mechanical engineering at the Technical University of Graz in Austria, expected finishing in February 2016. Since I was eight years old, I am building model planes out of paperboard. Since 2004 I scratch (that means building without an assembling set) Formula 1 and sportscars in 1:10th scale. The average time I need for such a car is around 400 to 700 hours within 4 to 8 months. One car has around 3500 up to 5000 single components. On this blog, you can take a look on my work and later, after my studies, hopefully you can see me in Formula 1.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: